• ްƽȴҸ λھֻѡ 2019-10-21
  • ϻ˼ Ҽ ߲ һ 2019-10-03
  • ĴԹ񾯰ʦѧ 2019-09-01
  • ɱΪǮҵ˾װ 2019-08-20
  • Ҳѵصķۡʮһƽ׵ķӡ 2019-08-19
  •  

    ˿֧
    Thrust Angular Contact Ball Bearings

    ZKLFϵ



    <>

            

    ͺ  ߴ   ھ   ̶ݶ  غ ת
    Shaft Designation Mass  Dimensions   t  Basic Load Ratings Limiting
    Diameter D B d1 D1 r r1 J d2 b l   Cr   Cor Speed
    Dynamic Static grease
    mm kg -0.25 min. min. min. min. min. t kN kN rpm
    12 ZKLF 1255.2RS  0.37 12 55 25 25 33.5 0.3 0.6 42 6.5 3 17 3120 M6 3 17.0 24.7 3800
    ZKLF 1255.2Z  0.37 12 55 25 25 33.5 0.3 0.6 42 6.5 3 17 3120 M6 3 17.0 24.7 7600
    15 ZKLF 1560.2RS  0.43 15 60 25 28 36.0 0.3 0.6 46 6.5 3 17 3120 M6 3 17.9 28.0 3500
    ZKLF 1560.2Z 0.43 15 60 25 23 12.0 0.3 0.6 46 6.5 3 17 3120 M6 3 17.9 28.0 7000
    17 ZKLF 1762.2RS 0.45 17 62 25 23 12.0 0.3 0.6 48 6.5 3 17 3120 M6 3 18.8 31.0 3300
    ZKLF 1762.2Z 0.45 17 62 25 25 14.0 0.3 0.6 48 6.5 3 17 3120 M6 3 18.8 31.0 6600
    20 ZKLF 2068.2RS  0.61 20 68 28 25 14.0 0.3 0.6 53 6.5 3 19 490 M6 4 26.0 47.0 3000
    ZKLF 2068.2Z 0.61 20 68 28 30 16.0 0.3 0.6 53 6.5 3 19 490 M6 4 26.0 47.0 5400
    25 ZKLF 2575.2RS  0.72 25 75 28 30 16.0 0.3 0.6 58 6.5 3 19 490 M6 4 27.5 55.0 2600
    ZKLF 2575.2Z  0.72 25 75 28 32 20.0 0.3 0.6 58 6.5 3 19 490 M6 4 27.5 55.0 4700
    30 ZKLF 3080.2RS 0.78 30 80 28 32 20.0 0.3 0.6 63 6.5 3 19 660 M6 6 29.0 64.0 2200
    ZKLF 3080.2Z 0.78 30 80 28 34 23.0 0.3 0.6 63 6.5 3 19 660 M6 6 29.0 64.0 4300
    35 ZKLF 3590.2RS 1.13 35 90 34 34 23.0 0.3 0.6 75 8.5 3 25 490 M8 4 41.0 89.0 2000
    ZKLF 3590.2Z 1.13 35 90 34 40 25.0 0.3 0.6 75 8.5 3 25 490 M8 4 41.0 89.0 3800
    40 ZKLF 40100.2RS 1.46 40 100 34 40 25.0 0.3 0.6 80 8.5 3 25 490 M8 4 43.0 101.0 1800
    ZKLF 40100.2Z 1.46 40 100 34 45 32.0 0.3 0.6 80 8.5 3 25 490 M8 4 43.0 101.0 3300
    50 ZKLF 50115.2RS 1.86 50 115 34 45 32.0 0.3 0.6 94 8.5 3 25 660 M8 6 46.5 126.0 1500
    ZKLF 50115.2Z 1.86 50 115 34 50 40.0 0.3 0.6 94 8.5 3 25 660 M8 6 46.5 126.0 3000
    60 ZKLF 60145.2Z 4.30 60 145 45 50 40.0 0.3 0.6 120 8.5 3 35 660 M8 8 84.0 214.0 3000
    ZKLF 70155.2Z 4.90 70 155 45 59 45.0 0.3 0.6 130 8.5 3 35 845 M8 8 88.0 241.0 2800
    80 ZKLF 80165.2Z 5.30 80 165 45 59 45.0 0.3 0.6 140 8.5 3 35 845 M8 8 91.0 265.0 2700
    90 ZKLF 90190.2Z 8.70 90 190 55 64 50.0 0.3 0.6 165 10.5 3 45 845 M10 8 135.0 395.0 2300
    100 ZKLF 100200.2Z 9.30 100 200 55 64 50.0 0.3 0.6 175 10.5 3 45 845 M10 8 140.0 435.0 2150
    ˵
    1.лغתٺѡο
    2.ʱתΪֵ30%ܷ
    Note:
    1.These load, speed and mass is reference of choice only.  
    2.With an effective oil supply, the limiting speed can be increased by about 30%, except for
      sealed roller followers. 

  • ްƽȴҸ λھֻѡ 2019-10-21
  • ϻ˼ Ҽ ߲ һ 2019-10-03
  • ĴԹ񾯰ʦѧ 2019-09-01
  • ɱΪǮҵ˾װ 2019-08-20
  • Ҳѵصķۡʮһƽ׵ķӡ 2019-08-19
  • ʱʱ ʱʱ˹ƻ ʱʱʹٷֻ l pk10ƻʽ ʱʱ3 ƱӮƻ ѺС˫ ptϷ ʱʱʶ