• ްƽȴҸ λھֻѡ 2019-10-21
  • ϻ˼ Ҽ ߲ һ 2019-10-03
  • ĴԹ񾯰ʦѧ 2019-09-01
  • ɱΪǮҵ˾װ 2019-08-20
  • Ҳѵصķۡʮһƽ׵ķӡ 2019-08-19
  • Բ

    Cylindrical Roller Bearings

    SL183

    SL185ϵ

    <>

                                  

    ͺ ߴ غ ת
    Shaft Designation Mass Dimensions Basic Load Ratings Limiting
    Diameter d D B r s   Cr   Cor Speed
    Dynamic Static
    mm g min. kN kN rpm
    20 SL18 3004 110 20 42 16 0.6 1.5 27.5 26.5 9000
    SL18 5004 200 20 42 30 0.6 1.0 47.5 53.0 9000
    25 SL18 3005 120 25 47 16 0.6 1.5 31.5 32.5 7000
    SL18 5005 230 25 47 30 0.6 1.0 54.0 65.0 7000
    30 SL18 3006 200 30 55 19 1.0 2.0 40.5 43.0 6500
    SL18 5006 350 30 55 34 1.0 1.5 70.0 86.0 6500
    35 SL18 3007 260 35 62 20 1.0 2.0 49.5 55.0 6000
    SL18 5007 460 35 62 36 1.0 1.5 85.0 109.0 5500
    40 SL18 3008 310 40 68 21 1.0 2.0 59.0 68.0 5000
    SL18 5008 560 40 68 38 1.0 1.5 101.0 136.0 5000
    45 SL18 3009 400 45 75 23 1.0 2.0 63.0 76.0 5000
    SL18 5009 710 45 75 40 1.0 1.5 108.0 151.0 4700
    50 SL18 3010 430 50 80 23 1.0 2.0 79.0 96.0 4500
    SL18 5010 760 50 80 40 1.0 1.5 135.0 191.0 4200
    55 SL18 3011 640 55 90 26 1.1 2.0 107.0 138.0 3800
    SL18 5011 1160 55 90 46 1.1 1.5 184.0 275.0 3600
    60 SL18 3012 690 60 95 26 1.1 2.0 110.0 145.0 3600
    SL18 5012 1240 60 95 46 1.1 1.5 189.0 290.0 3400
    65 SL18 3013 730 65 100 26 1.1 2.0 116.0 159.0 3300
    SL18 5013 1320 65 100 46 1.1 1.5 199.0 320.0 3100
    70 SL18 3014 1020 70 110 30 1.1 3.0 137.0 176.0 3400
    SL18 5014 1850 70 110 54 1.1 3.0 235.0 355.0 3100
    ˵
    1.лغתٺѡο
    2.֬ʱתΪֵ50%
    Note:
    1.These load, speed and mass is reference of choice only.  
    2.With grease lubrication, 50% of these limiting speed will apply.

  • ްƽȴҸ λھֻѡ 2019-10-21
  • ϻ˼ Ҽ ߲ һ 2019-10-03
  • ĴԹ񾯰ʦѧ 2019-09-01
  • ɱΪǮҵ˾װ 2019-08-20
  • Ҳѵصķۡʮһƽ׵ķӡ 2019-08-19
  • 99%׼ Ф׬ɹ ʱʱˢ ֻ齫 11ѡ5Ͷע ʱʱվ pkƻ׼ ʥƻ Ӯpk10